Memory test....OK

Decompressing...OK
System database initialization ... OK

BCM unit 0: SOC registers test ... Passed
BCM unit 0: PHY registers test ... Passed
BCM unit 0: MAC loopback test .... Passed
BCM unit 0: PHY loopback test .... Passed
Fan sensor test .................. Passed
Temperature sensor test .......... Passed
PoE test ......................... Passed

Checking Image Bank Integrity ... OK

Booting system
Decompressing...OK

Initializing ......

Completing initialization...

Reset configuration to factory default...OK
=======================================================
PN28089K Local Management System Version 1.0.0.51
MAC Address: 00:50:40:0B:**:**
=======================================================
Login Menu

Login: manager
Password: *******

PN28089K Local Management System

Main Menu

[G]eneral Information
[B]asic Switch Configuration...
[A]dvanced Switch Configuration...
[S]tatistics
Switch [T]ools Configuration...
Save Configuration to [F]lash
Run [C]LI
[Q]uit

Command> c
Enter the character in square brackets to select option

M8eGPWR+> en
M8eGPWR+# show sys-info

System up for : 000day(s), 00hr(s), 01min(s), 37sec(s)
Boot / Runtime Code Version: 1.0.0.14 / 1.0.0.51
Hardware Information
 Version : Version1
 CPU Utilization : 25.37 %
 DRAM / Flash Size : 64MB / 16MB
 DRAM User Area Size : Free: 18028420 bytes / Total: 34078720 bytes
 System Fan Status : Good
 System Temperature : CPU/29 ,System/28 degree(s) Celsius

Administration Information
 Switch Name :
 Switch Location :
 Switch Contact :

System Address Information
 MAC Address : 00:50:40:0B:**:**
 IP Address : 0.0.0.0
 Subnet Mask : 0.0.0.0
 Default Gateway : 0.0.0.0

M8eGPWR+# show interface info

Port Trunk Type Admin Link Mode Flow Ctrl Auto-MDI
---- ----- ----------- -------- ---- ------------ --------- --------
 1 --- 1000T Enabled Down Auto Disabled Disabled
 2 --- 1000T Enabled Down Auto Disabled Disabled
 3 --- 1000T Enabled Down Auto Disabled Disabled
 4 --- 1000T Enabled Down Auto Disabled Disabled
 5 --- 1000T Enabled Down Auto Disabled Disabled
 6 --- 1000T Enabled Down Auto Disabled Disabled
 7 --- 1000T Enabled Down Auto Disabled Disabled
 8 --- 1000T Enabled Down Auto Disabled Disabled
 9 --- 1000T Enabled Down Auto Disabled Enabled
 10 --- 1000T Enabled Down Auto Disabled Enabled

M8eGPWR+# show running-config
Building Configuration...
Current Configuration:
! -- start of config file --
! -- Software Version : 1.0.0.51 --
!
enable
config
!
spanning-tree rst version rstp
!
interface GigabitEthernet0/1
!
interface GigabitEthernet0/2
!
interface GigabitEthernet0/3
!
interface GigabitEthernet0/4
!
interface GigabitEthernet0/5
!
interface GigabitEthernet0/6
!
interface GigabitEthernet0/7
!
interface GigabitEthernet0/8
!
interface GigabitEthernet0/9
!
interface GigabitEthernet0/10
!
interface vlan1
member 1-10
exit
!
! -- end of configuration --
M8eGPWR+#