U-Boot 1.1.3 (Mar 29 2013 - 09:55:38)

CPU: AMCC PowerPC 440EPx Rev. A at 660 MHz (PLB=132, OPB=66, EBC=33 MHz)
 No Security/Kasumi support
 I2C boot EEPROM enabled
 Bootstrap Option G - Boot ROM Location I2C (Addr 0x54)
 Internal PCI arbiter enabled, PCI async ext clock used
 32 kB I-Cache 32 kB D-Cache
Board: Tomtoo
I2C: ready
DRAM: Initializing DDRSDRAM
DQS calibration - Window detected:
max_passing_cases = 54
wr_dqs_shift = 94
dll_dqs_delay_X = 29
dll_dqs_delay_X window = 3 - 56
DDR0_09=0x00011d5e
DDR0_22=0x03267e0b
DDR0_17=0x1d005d00
DDR0_18=0x1d1d1d1d
DDR0_19=0x1d1d1d1d
Zeroing SDRAM... DONE
 DDR: 1024 MB
POST RAM test disabled.
Now running in RAM - U-Boot at: 3fb2b000
trap_init : 0x0
system inventory subsystem initialized
FLASH: Tomtoo CFI Flash Driver Initialized
4 MB

DEBUG: ASIC Reset Enable Register Offset:0x88 Value:0x03...

CPLD: Reseting Bridge & ASIC...
ATA interface setup: io_base=0xf8f00000, port=0x3e0, ctl=0x7ec
PCI:
Skip our host bridge
 01 00 1657 001d 0280 1a
 00 07 10b5 8112 0604 18
In: serial
Out: serial
Err: serial
Net:

Checking system RAM - press any key to stop test

Checking memory address: 00100000

System RAM test using Default POST RAM Test succeeded.

set_bootstatus: BS_LOAD_OS, platform_idx = 16

Type run flash_nfs to mount root filesystem over NFS

Hit ESC to stop autoboot: 0
Map file at LBA sector 0x1c2e40
## Booting image at 00400000 ...
 Image Name: Linux-2.6.14.2
 Image Type: PowerPC Linux Multi-File Image (uncompressed)
 Data Size: 4290075 Bytes = 4.1 MB
 Load Address: 00000000
 Entry Point: 00000000
 Contents:
 Image 0: 3211398 Bytes = 3.1 MB
 Image 1: 1078663 Bytes = 1 MB
## Current stack ends at 0x3FAE9BE8 => set upper limit to 0x00C00000
## initrd at 0x007100D4 ... 0x0081765A (len=1078663=0x107587)
 Loading Ramdisk to 1fef8000, end 1ffff587 ... OK
initrd_start = 1fef8000, initrd_end = 1ffff587
## Transferring control to Linux (at address 00000000) ...
Installing Linux 2.6 Kernel
Attempting to find a root file system on hda2...
INIT: version 2.78 booting
Bypassing firmware validation.
INIT: Entering runlevel: 3
Starting Fabric OS Services...
FIPS off, RRD...
Found 2(threshold 5) abnormal reboots within 3000 seconds window(threshold)

sys_chip_init: class 0 max 24 Done
ethsw_ha_enabled = 1
uptime: 4293888857; sup_qid: 0
.
Fabric OS (switch)

switch console login: 2024/09/02-08:45:16, [HAM-1004], 4624222, 
CHASSIS, INFO, IBM_2498_F24, Processor rebooted - Reset.

SNMP Research EMANATE/Lite Agent Version 16.2.0.9
Copyright 1989-2006 SNMP Research, Inc.
ki_state_set: redundant ACTIVATE for instance 1
Sep 2 08:45:43 All service instances on Active
POST1: Started running Mon Sep 2 08:45:47 GMT 2024
POST1: Test #1 - Running turboramtest
2024/09/02-08:45:55, [HIL-1611], 4624223, FFDC | CHASSIS, CRITICAL, 
IBM_2498_F24, MISMATCH in PSU-FAN Air Flow direction. 
Replace PSU with fan air flows in same direction. System will be shut down in 2 minutes.
2024/09/02-08:45:55, [RAS-1001], 4624224, CHASSIS, 
INFO, IBM_2498_F24, First failure data capture (FFDC) event occurred.
2024/09/02-08:46:11, [TRCE-1001], 4624225, CHASSIS, 
WARNING, IBM_2498_F24, Trace dump available ! (reason: FFDC).
2024/09/02-08:46:11, [TRCE-1004], 4624226, CHASSIS, WARNING, IBM_2498_F24, 
Trace dump was not transferred because trace auto-FTP disabled.
POST1: Script PASSED with exit status of 0 Mon Sep 2 08:46:12 GMT 2024 took (0:0:24)
POST2: Started running Mon Sep 2 08:46:14 GMT 2024
POST2: Test #1 - Running portloopbacktest (SERDES)

Fabric OS (switch)

switch console login: admin
Password:
POST2: Script PASSED with exit status of 0 Mon Sep 2 08:46:44 GMT 2024 took (0:0:30)
switch:admin> 2024/09/02-08:46:45, [BL-1000], 4624227, CHASSIS, 
INFO, IBM_2498_F24, Initializing ports...
2024/09/02-08:46:45, [BL-1001], 4624228, CHASSIS, 
INFO, IBM_2498_F24, Port initialization completed.

switch:admin> switchshow
switchName: switch
switchType: 118.1
switchState: Online
switchMode: Native
switchRole: Principal
switchDomain: 1
switchId: fffc01
switchWwn: 10:00:00:27:f8:46:**:**
zoning: OFF
switchBeacon: OFF
FC Router: OFF
FC Router BB Fabric ID: 1
Address Mode: 0

Index Port Address Media Speed State Proto
==================================================
 0 0 010000 id N8 No_Light FC
 1 1 010100 id N8 No_Light FC
 2 2 010200 id N8 No_Light FC
 3 3 010300 id N8 No_Light FC
 4 4 010400 id N8 No_Light FC
 5 5 010500 id N8 No_Light FC
 6 6 010600 id N8 No_Light FC
 7 7 010700 id N8 No_Light FC
 8 8 010800 id N8 No_Light FC
 9 9 010900 id N8 No_Light FC
 10 10 010a00 id N8 No_Light FC
 11 11 010b00 id N8 No_Light FC
 12 12 010c00 -- N16 No_Module FC (No POD License) Disabled
 13 13 010d00 -- N16 No_Module FC (No POD License) Disabled
 14 14 010e00 -- N16 No_Module FC (No POD License) Disabled
 15 15 010f00 -- N16 No_Module FC (No POD License) Disabled
 16 16 011000 -- N16 No_Module FC (No POD License) Disabled
 17 17 011100 -- N16 No_Module FC (No POD License) Disabled
 18 18 011200 -- N16 No_Module FC (No POD License) Disabled
 19 19 011300 -- N16 No_Module FC (No POD License) Disabled
 20 20 011400 -- N16 No_Module FC (No POD License) Disabled
 21 21 011500 -- N16 No_Module FC (No POD License) Disabled
 22 22 011600 -- N16 No_Module FC (No POD License) Disabled
 23 23 011700 -- N16 No_Module FC (No POD License) Disabled
switch:admin> licenseshow
No licenses installed.
switch:admin> version
Kernel: 2.6.14.2
Fabric OS: v7.1.0c
Made on: Tue Apr 16 18:06:01 2013
Flash: Wed Jun 26 03:00:45 2013
BootProm: 1.0.10
switch:admin> sfpshow
Port 0: id (sw) Vendor: BROCADE Serial No: UAA41251177**** Speed: 2,4,8_Gbps
Port 1: id (sw) Vendor: BROCADE Serial No: UAA41251175**** Speed: 2,4,8_Gbps
Port 2: id (sw) Vendor: BROCADE Serial No: UAA41251175**** Speed: 2,4,8_Gbps
Port 3: id (sw) Vendor: BROCADE Serial No: UAA41251176**** Speed: 2,4,8_Gbps
Port 4: id (sw) Vendor: BROCADE Serial No: UAA41251174**** Speed: 2,4,8_Gbps
Port 5: id (sw) Vendor: BROCADE Serial No: UAA41251173**** Speed: 2,4,8_Gbps
Port 6: id (sw) Vendor: BROCADE Serial No: UAA41251176**** Speed: 2,4,8_Gbps
Port 7: id (sw) Vendor: BROCADE Serial No: UAA41251174**** Speed: 2,4,8_Gbps
Port 8: id (sw) Vendor: BROCADE Serial No: UAF41243000**** Speed: 2,4,8_Gbps
Port 9: id (sw) Vendor: BROCADE Serial No: UAF41246000**** Speed: 2,4,8_Gbps
Port 10: id (sw) Vendor: BROCADE Serial No: UAF41246000**** Speed: 2,4,8_Gbps
Port 11: id (sw) Vendor: BROCADE Serial No: UAF41246000**** Speed: 2,4,8_Gbps
Port 12: --
Port 13: --
Port 14: --
Port 15: --
Port 16: --
Port 17: --
Port 18: --
Port 19: --
Port 20: --
Port 21: --
Port 22: --
Port 23: --
switch:admin> diagshow

Diagnostics Status: Mon Sep 02 08:47:40 2024

Slot: 0 UPORTS
Port BPort Diag Active Speed FrTX FrRX LLI Errs Loopback
0/0 0 OK DN 8G Auto -- -- --
0/1 5 OK DN 8G Auto -- -- --
0/2 2 OK DN 8G Auto -- -- --
0/3 7 OK DN 8G Auto -- -- --
0/4 1 OK DN 8G Auto -- -- --
0/5 4 OK DN 8G Auto -- -- --
0/6 3 OK DN 8G Auto -- -- --
0/7 6 OK DN 8G Auto -- -- --
0/8 12 OK DN 8G Auto -- -- --
0/9 9 OK DN 8G Auto -- -- --
0/10 14 OK DN 8G Auto -- -- --
0/11 11 OK DN 8G Auto -- -- --
0/12 8 OK DN 16G Auto -- -- --
0/13 13 OK DN 16G Auto -- -- --
0/14 10 OK DN 16G Auto -- -- --
0/15 15 OK DN 16G Auto -- -- --
0/16 21 OK DN 16G Auto -- -- --
0/17 18 OK DN 16G Auto -- -- --
0/18 23 OK DN 16G Auto -- -- --
0/19 16 OK DN 16G Auto -- -- --
0/20 20 OK DN 16G Auto -- -- --
0/21 17 OK DN 16G Auto -- -- --
0/22 22 OK DN 16G Auto -- -- --
0/23 19 OK DN 16G Auto -- -- --

Total Diag Frames Tx: 0
Total Diag Frames Rx: 0
switch:admin> chassisshow

FAN Unit: 1
Fan Direction: Forward
Time Awake: 0 days

FAN Unit: 2
Fan Direction: Reverse
Time Awake: 0 days

POWER SUPPLY Unit: 1
Power Source: AC
Time Awake: 0 days

POWER SUPPLY Unit: 2
Power Source: AC
Time Awake: 0 days

CHASSIS/WWN Unit: 1
Header Version: 2
Power Usage (Watts): -40
Factory Part Num: 40-1000737-02
Factory Serial Num: CCD2503****
Manufacture: Day: 12 Month: 12 Year: 2012
Update: Day: 23 Month: 2 Year: 2024
Time Alive: 3835 days
Time Awake: 0 days
ID: IBM0000CA
Part Num: 0024980000F24
Serial Num: 102****

switch:admin> chassisname
IBM_2498_F24
switch:admin> 
2024/09/02-08:42:51, [HIL-1206], 4624214, CHASSIS, ERROR, 
IBM_2498_F24, Fan 1 sensor 2 , speed (0 RPM) below threshold.
2024/09/02-08:42:51, [EM-1034], 4624215, CHASSIS, ERROR, 
IBM_2498_F24, Fan 1 set to faulty, rc=20006.

EM: Halting system - now!
2024/09/02-08:42:52, [HIL-1612], 4624216, CHASSIS, CRITICAL, 
IBM_2498_F24, MISMATCH in PSU-FAN Air Flow direction. System shut down.

Broadcast message from root Mon Sep 2 08:42:52 2024...

The system is going down for system halt NOW !!
2024/09/02-08:42:52, [EM-1002], 4624217, FFDC | CHASSIS, INFO, 
IBM_2498_F24, System fan(s) status Fan1=6958RPM Fan2=7031RPM .
2024/09/02-08:42:52, [EM-1001], 4624218, FFDC | CHASSIS, CRITICAL, 
IBM_2498_F24, Switch is overheating: Shutting down.
INIT: Switching to runlevel: 0
INIT: Sending processes the TERM signal
2024/09/02-08:42:52, [RAS-1001], 4624219, CHASSIS, INFO, 
IBM_2498_F24, First failure data capture (FFDC) event occurred.
2024/09/02-08:42:53, [TRCE-1001], 4624220, CHASSIS, WARNING, 
IBM_2498_F24, Trace dump available ! (reason: FFDC).
2024/09/02-08:42:53, [TRCE-1004], 4624221, CHASSIS, WARNING, 
IBM_2498_F24, Trace dump was not transferred because trace auto-FTP disabled.
chassis:0-lfm: Image-incomplete event
##RSCMON exiting due to signal: 19, pending signals: 0x0, 0x0
##exiting due to signal: 19, pending signals: 0x0, 0x0
Stopping diagnostics
Unmounting all filesystems.
The system is halted
Shutdown: hda
Power down.