Memory test....OK

Decompressing...OK
System database initialization ... OK
ICS unit 0: Dev 0xB025, Rev 0x11, Chip BCM56025_B0, Driver BCM56224_B0
Attaching SOC unit 0...

BCM unit 0: SOC registers test ... Passed
BCM unit 0: PHY registers test ... Passed
BCM unit 0: MAC loopback test .... Passed
BCM unit 0: PHY loopback test .... Passed
Fan sensor test .................. Passed
PoE test ......................... Passed

Checking Image Bank Integrity ........ OK

Booting system
Decompressing...OK

OS Init complete
sal_core_init completed
sal_appl_init completed
Broadcom Command Monitor: Copyright (c) 1998-2007 Broadcom Corporation
ICS unit 0: Dev 0xB025, Rev 0x11, Chip BCM56025_B0, Driver BCM56224_B0
SOC unit 0 attached to PCI device BCM56025_B0
SOC unit 0 attached
Loading the rc.soc file
rc: unit 0 device BCM56025_B0
rc: MMU initialized
rc: BCM driver initialized.
rc: L2 Table shadowing enabled
rc: Port modes initialized

Console Task creation is successful

Telnet Task creation is successful

Reset configuration to factory default...OK
=======================================================
PN231699 Local Management System Version 2.0.0.102
MAC Address: 00:50:40:47:**:**
=======================================================
Login Menu

Login: manager
Password: *******

PN231699 Local Management System

Main Menu

[G]eneral Information
[B]asic Switch Configuration...
[A]dvanced Switch Configuration...
[S]tatistics
Switch [T]ools Configuration...
Save Configuration to [F]lash
Run [C]LI
[Q]uit

Command> c
Enter the character in square brackets to select option

M16PWR> en
M16PWR# show sys-info

System up for : 000day(s), 00hr(s), 02min(s), 57sec(s)
Boot / Runtime Code Version: 1.0.0.20 / 2.0.0.102
Hardware Information
 Version : Version3
 CPU Utilization : 19.01 %
 DRAM / Flash Size : 64MB / 8MB
 DRAM User Area Size : Free: 21387628 bytes / Total: 36175872 bytes
 System Fan Status : Good
 System Temperature : CPU/17 ,System/15 degree(s) Celsius
Administration Information
 Switch Name :
 Switch Location :
 Switch Contact :
System Address Information
 MAC Address : 00:50:40:47:**:**
 IP Address : 0.0.0.0
 Subnet Mask : 0.0.0.0
 Default Gateway : 0.0.0.0
 DHCP Mode : Disabled

M16PWR# show tech
% Unknown command.
M16PWR# show startup-config
Building Configuration...
Start Up Configuration:
! -- start of config file --
! -- Software Version : 2.0.0.102 --
!
enable
config
!
spanning-tree rst version rstp
!
interface FastEthernet0/1
!
interface FastEthernet0/2
!
interface FastEthernet0/3
!
interface FastEthernet0/4
!
interface FastEthernet0/5
!
interface FastEthernet0/6
!
interface FastEthernet0/7
!
interface FastEthernet0/8
!
interface FastEthernet0/9
!
interface FastEthernet0/10
!
interface FastEthernet0/11
!
interface FastEthernet0/12
!
interface FastEthernet0/13
!
interface FastEthernet0/14
!
interface FastEthernet0/15
!
interface FastEthernet0/16
!
interface GigabitEthernet0/17
!
interface GigabitEthernet0/18
!
interface vlan1
member 1-18
exit
!
! -- end of configuration --
M16PWR#