Router(config)# sh clo
Thursday, 12 September 2024 11:40:46 +09 00
Router(config)#
Router(config)# sh ve
NEC Portable Internetwork Core Operating System Software
IX Series IX2106 (magellan-sec) Software, Version 10.5.13, RELEASE SOFTWARE
Compiled Mar 26-Fri-2021 14:37:12 JST #2 by sw-build, coregen-10.5(13)
ROM: System Bootstrap, Version 8.2
System Diagnostic, Version 8.2
Initialization Program, Version 8.2
System uptime is 2 minutes
System woke up by reload, caused by power-on
System started at Sep 12-Thu-2024 11:38:32 JST
System image file is "ix2106-ms-10.5.13.ldc"
Processor board ID <0>
IX2106 (P1010E) processor with 262144K bytes of memory.
2 GigaEthernet/IEEE 802.3 interfaces
1024K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)
Router(config)#
Router(config)# sh env
System hardware information:
Line voltage:
1.0 volt line measured at 0.9729V
Status is normal
1.35 volt line measured at 1.3113V
Status is normal
2.5 volt line measured at 2.4310V
Status is normal
3.3 volt line measured at 3.2680V
Status is normal
5.0 volt line measured at 4.9920V
Status is normal
Internal temperature:
Internal temperature measured at 30.0C
Status is normal
Router(config)#
Router(config)# sh fla
Codes: M - Main-side, B - Backup-side, N - Newfile, R - Runnable
A - Active-file, + - Next-boot, * - Bootmode-entry
Length Name Status
8422284 ix2106-ms-10.5.13.ldc MA
[8513960 bytes used, 18468634 available, 26982594 total]
26368 Kbytes of processor board System flash (Read/Write)
Router(config)#
Router(config)# sh ha
IX Series IX2106 Hardware Platform
S/N: B7THU00289
ZTP<0>:
ZTP ID : 8022A732250B#IX#IX2106#B7THU00289
Status : stopped
Next boot mode : normal mode
Processor board:
Processor board ID <0>
CPU/DDR3/CSB/LBUS clock frequencies are 800/800/400/100 MHz
P1010E processor (revision 0x80f90020)
262144K bytes of main memory
1024K bytes of non-volatile configuration memory
32768K bytes of processor flash memory
IPsec accelerator:
on board security engine(SEC4.4), revision 0x100
Onboard interface unit GigaEthernet0:
GigaEthernet Transceiver is 88E6352
Onboard interface unit GigaEthernet1:
GigaEthernet Switch with Transceivers is 88E6352
LED information:
PWR: On ALM: Off BSY: Off
VPN: Off PPP: Off BAK: Off
Router(config)#
Router(config)# sh lic
IPsec H/W encryption is activated
VRRP option is activated
Router(config)#
Router(config)# sh vla
GigaEthernet1 Virtual Bridged LAN
Group N/A status is down
Assigned ports: 1 2 3 4
0 input frames, 0 output frames
Router(config)#
Router(config)# sh err
0% flash memory used, 126976 bytes free, total 126976 bytes
Latest Occurrence Time Event Description
2021/07/02 09:03:58 +0900 INFO: Start logging fault and crash errorlog_information
2024/09/12 11:38:19 +0900 INFO: Start bootstrap from this side [0].
2024/09/12 11:38:17 +0900 INFO: Erase startup-config cmd:cc state:succeeded from:@local
2021/09/14 22:06:13 +0900 INFO: Modify startup-config cmd:write state:succeeded from:@local
Router(config)#
Router(config)# ch cr
% cr -- Invalid command.
Router(config)#
Router(config)# sh cr
0% flash memory used, 126976 bytes free, total 126976 bytes
Latest Occurrence Time Event Description
2021/07/02 09:03:58 +0900 INFO: Start logging fault and crash errorlog_information
2024/09/12 11:38:19 +0900 INFO: Start bootstrap from this side [0].
2024/09/12 11:38:17 +0900 INFO: Erase startup-config cmd:cc state:succeeded from:@local
2021/09/14 22:06:13 +0900 INFO: Modify startup-config cmd:write state:succeeded from:@local
Router(config)#
Router(config)# sh config
% Non-volatile configuration memory is not present
Router(config)#
Router(config)# sh log
% Buffer logging disabled.
Router(config)#
вопрос продавцу
