Boot Procedure V1.0.0.02
-------------------------------------------------------------------------------
 Power On Self Test ........................................ 100 %

 MAC Address : 00-C0-8F-5A-**-**
 H/W Version : A1

 Please Wait, Loading V2.0.0.01 Runtime Image .............. 100 %
 UART init ................................................. 100 %
 Starting runtime image
 Device Discovery .......................................... 100 %
 Configuration init ........................................ 100 %

**********
* Logout *
**********

Press any key to login...

 ZEQUO 2400
 Command Line Interface

 Firmware: Build V2.0.0.01

UserName:manager
PassWord:*******

Z2400:admin#show switch
Command: show switch

Product Name : ZEQUO 2400
Product Number : PN26240E
MAC Address : 00-C0-8F-5A-**-**
IP Address : 196.45.100.28 (Manual)
VLAN Name : default
Subnet Mask : 255.255.255.0
Default Gateway : 196.45.100.1
Boot PROM Version : Build V1.0.0.02
Firmware Version : Build V2.0.0.01
Hardware Version : A1
System Name :
System Location :
System Uptime : 0 days, 0 hours, 1 minutes, 26 seconds
System Contact :
Spanning Tree : Disabled
GVRP : Disabled
IGMP Snooping : Disabled
MLD Snooping : Disabled
VLAN Trunk : Disabled
Telnet : Enabled (TCP 23)
SNMP : Disabled
SSH Status : Disabled
802.1X : Disabled
Jumbo Frame : Off
CLI Paging : Enabled
MAC Notification : Disabled
Port Mirror : Disabled
SNTP : Disabled
HOL Prevention State : Enabled
Syslog Global State : Disabled
Password Encryption Status : Disabled
DNS Resolver : Disabled

Z2400:admin#show environment
Command: show environment

Temperature Trap State : Enabled
Temperature Log State : Enabled

Internal Power : Active
Right Fan 1 : Speed Low
Right Fan 2 : Speed Low
Current Temperature(Celsius) : 32
Fan High Temperature Threshold(Celsius) : 40
Fan Low Temperature Threshold(Celsius) : 35
High Warning Temperature Threshold(Celsius) : 79
Low Warning Temperature Threshold(Celsius) : 11

Z2400:admin#