(Cisco Controller)

Enter User Name (or 'Recover-Config' this one-time only to reset configuration 
to factory defaults)

User: Cisco
Password:********
(Cisco Controller) >
(Cisco Controller) >show boot
Primary Boot Image............................... 8.5.131.0 (default) (active)
Backup Boot Image................................ 8.5.131.0

(Cisco Controller) >show inventory

Burned-in MAC Address............................ B0:90:7E:8E:**:**
Maximum number of APs supported.................. 150
NAME: "Chassis" , DESCR: "Cisco 3500 Series Wireless LAN Controller"
PID: AIR-CT3504-K9, VID: V02, SN: FCW2226****

(Cisco Controller) >show sysinfo

Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 8.5.131.0
RTOS Version..................................... 8.5.131.0
Bootloader Version............................... 8.5.103.0
Emergency Image Version.......................... 8.5.103.0

OUI File Last Update Time........................ N/A
Build Type....................................... DATA + WPS

System Name...................................... Cisco_8e:**:**
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.2427
Redundancy Mode.................................. Disabled
IP Address....................................... 192.168.1.11
IPv6 Address..................................... ::
Last Reset....................................... Soft reset due to RST_SOFT_RST write
System Up Time................................... 0 days 0 hrs 1 mins 2 secs
System Timezone Location.........................
System Stats Realtime Interval................... 5
System Stats Normal Interval..................... 180

Configured Country............................... J2 - Japan 2(P)
Operating Environment............................ Commercial (10 to 35 C)
Internal Temp Alarm Limits....................... -10 to 80 C
Internal Temperature............................. +43 C
Mgig Temp Alarm Limits........................... -10 to 78 C
Mgig Temperature................................. +32 C
External Temp Alarm Limits....................... -10 to 71 C
External Temperature............................. +28 C
Fan Status....................................... OK
Fan Speed Mode................................... Disable

State of 802.11b Network......................... Disabled
State of 802.11a Network......................... Disabled
Number of WLANs.................................. 1
Number of Active Clients......................... 0

OUI Classification Failure Count................. 0

Burned-in MAC Address............................ B0:90:7E:8E:**:**
Maximum number of APs supported.................. 150
System Nas-Id....................................
WLC MIC Certificate Types........................ SHA1/SHA2
Licensing Type................................... RTU

(Cisco Controller) >show license all

 Feature name: ap_count
 License type: Evaluation
 License Eula: Not Accepted
 Evaluation total period: 12 weeks 6 days
 Evaluation period left: 89 days
 License state: Inactive, Not-In-Use
 License Nodelocked: Yes
 RTU License Count: 150

 Feature name: ap_count (adder)
 License type: Permanent
 License state: Active, Not-In-Use
 License Nodelocked: No
 RTU License Count: 32

 ==================================
 Total available count : 32
 Total inuse count : 0

(Cisco Controller) >show license capacity

Licensed Feature Max Count Current Count Remaining Count Remaining Capacity
-----------------------------------------------------------------------------------------
AP Count 32 0 32 150/150

(Cisco Controller) >