Memory test....OK

Decompressing...OK
System database initialization ... OK
ICS unit 0: Dev 0xB025, Rev 0x11, Chip BCM56025_B0, Driver BCM56224_B0
Attaching SOC unit 0...

BCM unit 0: SOC registers test ... Passed
BCM unit 0: PHY registers test ... Passed
BCM unit 0: MAC loopback test .... Passed
BCM unit 0: PHY loopback test .... Passed
Fan sensor test .................. Passed
PoE test ......................... Passed

Checking Image Bank Integrity ........ OK

Booting system
Decompressing...OK

OS Init complete
sal_core_init completed
sal_appl_init completed
Broadcom Command Monitor: Copyright (c) 1998-2007 Broadcom Corporation
ICS unit 0: Dev 0xB025, Rev 0x11, Chip BCM56025_B0, Driver BCM56224_B0
SOC unit 0 attached to PCI device BCM56025_B0
SOC unit 0 attached
Loading the rc.soc file
rc: unit 0 device BCM56025_B0
rc: MMU initialized
rc: BCM driver initialized.
rc: L2 Table shadowing enabled
rc: Port modes initialized

Console Task creation is successful

Telnet Task creation is successful

Reset configuration to factory default...OK
=============================================================
PN23249K/PN23249A Local Management System Version 2.0.0.101
MAC Address: 00:50:40:01:**:**
=============================================================
Login Menu

Login: manager
Password: *******

PN23249K/PN23249A Local Management System

Main Menu

[G]eneral Information
[B]asic Switch Configuration...
[A]dvanced Switch Configuration...
[S]tatistics
Switch [T]ools Configuration...
Save Configuration to [F]lash
Run [C]LI
[Q]uit

Command> c
Enter the character in square brackets to select option

M24PWR> en
M24PWR# show sys-info

System up for : 000day(s), 00hr(s), 01min(s), 31sec(s)
Boot / Runtime Code Version: 1.0.0.20 / 2.0.0.101
Hardware Information
 Version : Version2
 CPU Utilization : 29.95 %
 DRAM / Flash Size : 64MB / 8MB
 DRAM User Area Size : Free: 20874928 bytes / Total: 36175872 bytes
 System Fan Status : Good
 System Temperature : CPU/28 ,System/27 degree(s) Celsius
Administration Information
 Switch Name :
 Switch Location :
 Switch Contact :
System Address Information
 MAC Address : 00:50:40:01:**:**
 IP Address : 0.0.0.0
 Subnet Mask : 0.0.0.0
 Default Gateway : 0.0.0.0
 DHCP Mode : Disabled

M24PWR# show interface info

Port Trunk Type Admin Link Mode Flow Ctrl Auto-MDI
---- ----- ----------- -------- ---- ------------ --------- --------
 1 --- 100TX Enabled Down Auto Disabled Disabled
 2 --- 100TX Enabled Down Auto Disabled Disabled
 3 --- 100TX Enabled Down Auto Disabled Disabled
 4 --- 100TX Enabled Down Auto Disabled Disabled
 5 --- 100TX Enabled Down Auto Disabled Disabled
 6 --- 100TX Enabled Down Auto Disabled Disabled
 7 --- 100TX Enabled Down Auto Disabled Disabled
 8 --- 100TX Enabled Down Auto Disabled Disabled
 9 --- 100TX Enabled Down Auto Disabled Disabled
 10 --- 100TX Enabled Down Auto Disabled Disabled
 11 --- 100TX Enabled Down Auto Disabled Disabled
 12 --- 100TX Enabled Down Auto Disabled Disabled
 13 --- 100TX Enabled Down Auto Disabled Disabled
 14 --- 100TX Enabled Down Auto Disabled Disabled
 15 --- 100TX Enabled Down Auto Disabled Disabled
 16 --- 100TX Enabled Down Auto Disabled Disabled
 17 --- 100TX Enabled Down Auto Disabled Disabled
 18 --- 100TX Enabled Down Auto Disabled Disabled
 19 --- 100TX Enabled Down Auto Disabled Disabled
 20 --- 100TX Enabled Down Auto Disabled Disabled
 21 --- 100TX Enabled Down Auto Disabled Disabled
 22 --- 100TX Enabled Down Auto Disabled Disabled
 23 --- 100TX Enabled Down Auto Disabled Disabled
 24 --- 100TX Enabled Down Auto Disabled Disabled
 25 --- 1000T Enabled Down Auto Disabled Enabled
 26 --- 1000T Enabled Down Auto Disabled Enabled

M24PWR# show running-config
Building Configuration...
Current Configuration:
! -- start of config file --
! -- Software Version : 2.0.0.101 --
!
enable
config
!
spanning-tree rst version rstp
!
interface FastEthernet0/1
!
interface FastEthernet0/2
!
interface FastEthernet0/3
!
interface FastEthernet0/4
!
interface FastEthernet0/5
!
interface FastEthernet0/6
!
interface FastEthernet0/7
!
interface FastEthernet0/8
!
interface FastEthernet0/9
!
interface FastEthernet0/10
!
interface FastEthernet0/11
!
interface FastEthernet0/12
!
interface FastEthernet0/13
!
interface FastEthernet0/14
!
interface FastEthernet0/15
!
interface FastEthernet0/16
!
interface FastEthernet0/17
!
interface FastEthernet0/18
!
interface FastEthernet0/19
!
interface FastEthernet0/20
!
interface FastEthernet0/21
!
interface FastEthernet0/22
!
interface FastEthernet0/23
!
interface FastEthernet0/24
!
interface GigabitEthernet0/25
!
interface GigabitEthernet0/26
!
interface vlan1
member 1-26
exit
!
! -- end of configuration --
M24PWR#