(Cisco Controller)

Enter User Name (or 'Recover-Config' this one-time only 
to reset configuration to factory defaults)

User: Cisco
Password:********
(Cisco Controller) >
(Cisco Controller) >show boot
Primary Boot Image............................... 8.0.121.0 (default) (active)
Backup Boot Image................................ 7.4.121.0

(Cisco Controller) >show inventory

Burned-in MAC Address............................ 80:E0:1D:8B:**:**
Power Supply 1................................... Present, OK
Power Supply 2................................... Absent
Maximum number of APs supported.................. 500
NAME: "Chassis" , DESCR: "Cisco 5500 Series Wireless LAN Controller"
PID: AIR-CT5508-K9, VID: V04, SN: FCW1938****

(Cisco Controller) >show sysinfo

Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 8.0.121.0
Bootloader Version............................... 1.0.20
Field Recovery Image Version..................... 7.6.95.16
Firmware Version................................. FPGA 1.7, Env 1.8, USB console 2.2
Build Type....................................... DATA + WPS

System Name...................................... Cisco_8b:**:**
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.1069
Redundancy Mode.................................. SSO
IP Address....................................... 192.168.1.1
IPv6 Address..................................... ::
Last Reset....................................... Power on reset
System Up Time................................... 0 days 0 hrs 7 mins 17 secs
System Timezone Location.........................
System Stats Realtime Interval................... 5
System Stats Normal Interval..................... 180

Configured Country............................... J2 - Japan 2(P)
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +30 C
External Temperature............................. +17 C
Fan Status....................................... OK

State of 802.11b Network......................... Disabled
State of 802.11a Network......................... Disabled
Number of WLANs.................................. 1
Number of Active Clients......................... 0

Burned-in MAC Address............................ 80:E0:1D:8B:**:**
Power Supply 1................................... Present, OK
Power Supply 2................................... Absent
Maximum number of APs supported.................. 500
System Nas-Id.................................... Cisco_8b:**:**
WLC MIC Certificate Types........................ SHA1/SHA2

(Cisco Controller) >show license all

License Store: Primary License Storage
StoreIndex: 0 Feature: base Version: 1.0
 License Type: Permanent
 License State: Active, Not in Use
 License Count: Non-Counted
 License Priority: Medium
License Store: Primary License Storage
StoreIndex: 1 Feature: base-ap-count Version: 1.0
 License Type: Permanent
 License State: Inactive
 License Count: 100 / 0 (Active/In-use)
 License Priority: Medium
License Store: Primary License Storage
StoreIndex: 2 Feature: base-ap-count Version: 1.0
 License Type: Permanent
 License State: Active, In Use
 License Count: 150 /150 (Active/In-use)
 License Priority: Medium
License Store: Evaluation License Storage
StoreIndex: 0 Feature: base-ap-count Version: 1.0
 License Type: Evaluation
 License State: Inactive
 Evaluation total period: 8 weeks 4 days
 Evaluation period left: 8 weeks 4 days
 License Count: 500 / 0 (Active/In-use)
 License Priority: None

(Cisco Controller) >show license capacity

Licensed Feature Max Count Current Count Remaining Count
-----------------------------------------------------------------------
AP Count 150 0 150

(Cisco Controller) >show license feature

Feature name Enforcement Evaluation Clear Allowed Enabled
base-ap-count yes yes yes yes
data_encryption yes no yes no
high_availability yes no yes no

(Cisco Controller) >